Rear-facing webcam

Description

Spare part number

 

 

Rear-facing webcam (8.0-MP, auto-focus, with flash; includes cable and double-sided adhesive)

789611-001

 

 

Before removing the rear-facing webcam, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 13).

5.Remove the battery (see Battery on page 14).

6.Remove the middle frame (see Middle frame on page 16).

Remove the rear-facing webcam:

1.Disconnect the rear-facing webcam cable (1) from the system board.

2.Detach the rear-facing webcam (2) from the display panel assembly. (The rear-facing webcam is attached to the display panel assembly with double-sided adhesive.)

3.Remove the rear-facing webcam and cable. Reverse this procedure to install the rear-facing webcam.

18 Chapter 5 Removal and replacement procedures

Page 24
Image 24
HP 6 VoiceTab Plus manual Rear-facing webcam, Description Spare part number