Reverse this procedure to install the antenna board.
Speaker and vibrator module
Description | Spare part number |
|
|
Speaker (bottom, includes vibrator module, | |
|
|
Before removing the bottom speaker and vibrator module, follow these steps:
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 13).
5.Remove the battery (see Battery on page 14).
6.Remove the Middle frame (see Middle frame on page 16).
Remove the speaker and vibrator module:
1.Disconnect the vibrator module cable (1) from the vibrator module.
2.Detach the vibrator module (2) from the display panel assembly. (The vibrator module is attached to the display panel assembly with
20 Chapter 5 Removal and replacement procedures
