4.Pull the green latch next to the drive outward (1) and slide the drive out of the bay (2).

Installing a hard drive

1.Prepare the computer for disassembly (Preparation for disassembly on page 36).

2.Remove the access panel (Access panel on page 37).

3.You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket similar to the example shown below.

●Slide the 2.5-inch drive into the bay adapter bracket, ensuring the connector on the drive is fully inserted into the connector on the adapter bracket.

54 Chapter 4 Removal and replacement procedures – Microtower (MT) chassis