HP Photosmart 715 manual 60

Problem	Possible cause	Solution
The incorrect	The wrong language	Change the camera language by using
language is	was selected when	the camera’s Setup menu.
set on the	you started the
camera.	camera the first
	time.
		1 After opening the Setup menu, use
		the down side of the	controller
		to scroll to the last menu option.
		2 Press the right or left side of the
		controller until the desired language
		appears, and then press OK.
A long delay	The camera is still	Wait a few seconds for the camera to
occurs after I	saving the last	finish processing the image, and then
press the	picture you took.	press the SHUTTER button halfway down.
shutter button		When a steady green light appears next
and before		to the viewfinder, the camera is ready to
the camera		take another picture.
takes a
	The light is low and	In dim light the camera requires a longer
picture.
	the flash is turned	exposure. Keep the camera very steady
	off.	by placing it on a tripod until it takes the
		picture; or improve the lighting
		conditions or use the flash.

A red light	The camera is still
appears next	saving the last
to the	picture you took.
viewfinder
when I press
the SHUTTER
button.

Wait a few seconds for the camera to finish processing the image, and then press the SHUTTER button halfway down. When a steady green light appears next to the viewfinder, the camera is ready to take another picture.

The CF memory	Install a new CF memory card, make
card has insufficient	room on the current card by deleting or
space for the	unloading photos, or select a lower
picture. (The status	image quality setting.
LCD shows 000
pictures remaining.)

The CF memory card that you have in the camera is damaged or is not formatted.

Format the CF memory card or replace it with a new, formatted card.

The flash is	Wait until the flash icon on the status
recharging.	LCD stops blinking before taking another
	flash picture.

52 HP photosmart 715 user guide