To connect the camera to a computer running Windows

1Make sure that the camera is turned off.

2Plug the smaller end of the USB cable into the camera.

3Plug the other end of the cable into any USB port on the computer.

Note

When the camera is connected to a computer, only

 

the

switch operates. The other camera

 

buttons do not respond.

Unloading images to a Windows computer

Unloading is the process of copying images from the CF memory card in the camera to a computer.

You can unload images from your camera in one of three ways: automatically, manually, or by mounting the camera as a disk drive. The automatic unload procedure is the preferred method. For descriptions of the other methods, see the online documentation with the HP Photo Imaging software.

Tip

To conserve battery power, use an HP-approved AC

 

adapter (optional) when you are unloading images

 

to a computer.

 

 

Follow the procedure in this section if your computer runs Windows Me, Windows XP, Windows 2000, or Windows 98.

To unload images to a Windows computer

1Connect the camera to the computer using the USB cable.

2Turn on the camera.

32

HP photosmart 715 user guide