3.Insert the driver CD, select Install the software automatically (Recommended), and click Next.
4.Click Finish and restart Windows to complete the installation.
To Verify Windows 2000/XP/Server 2003 Installation
1.Right click My Computer and click Manage.
2.Select Device Manager.
3.Double click SCSI and RAID controllers, Silicon Image SiI 3114... Controller should be listed.
Windows Vista™ (32-bit)
For New Installation
1.Install the board and follow Microsoft procedures to install Windows Vista accordingly.
2.At the Where do you want to install Windows?, click Load Driver.
3.Insert the driver CD, then click Browse.
4.Double click CD Drive... Drivers.
5.Select 32bit, click OK.
6.Select Silicon Image SiI... SATALink Controller, then click Next.
7.Follow the
For Existing Installation
1.Install the board and boot up Windows.
2.At the Found New Hardware Wizard, click Locate and install driver software (recommended).
3.Click Continue, insert the driver CD, click Next.
4.Click Close to complete the installation.
7
