GE 2-9926 manual Changing the Battery

Models: 2-9926

1 26
Download 26 pages 29.53 Kb
Page 19
Image 19

CHANGING THE BATTERY

Make sure RING/POWER switch is OFF before you replace battery.

1.Remove the battery compartment door.

2.Disconnect the cord attached to the battery pack and remove the battery pack from the handset.

3.Insert the new battery pack and connect the cord into the jack inside the handset.

4.Put the battery compartment door back on.

5.If you don’t charge the handset

battery properly (for 12 hours) when you first set up the phone and/or when you install a new battery pack, the battery’s long- term performance will be compro- mised.

BATTERY SAFETY PRECAUTIONS

Don’t disassemble, mutilate, puncture, wet, or dispose of battery in fire. Like other batteries of this type, if it is burned or punctured, it could release toxic materials which can cause injury.

Keep batteries out of the reach of children.

RBRC

RBRC

Ni-Cd

NOTE: The RBRC seal on the battery used in your Thomson Consumer Electronics product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States of America. Please call 1-800-8- BATTERY for information or contact your local recycling center.

1 9

Page 19
Image 19
GE 2-9926 manual Changing the Battery