SIIG 04-0322C Windows ME, For Existing Installation, At the Add New Hardware Wizard, click Next

8.Click Yes, then click Finish to complete.

For Existing Installation

1.Install the board and boot up Windows.

2.At the Add New Hardware Wizard, click Next.

3.Select Search for the best driver for your device and click Next.

4.Insert the driver CD, check Specify a location, uncheck the other boxes, type D:\9x-Me, then click Next. (Change D: to match your CD-ROM drive letter)

5.Click Next, then Finish.

6.Remove the driver CD and restart Windows to complete the driver installation.

Windows ME

For New Installation

1.Install the board and follow Microsoft procedures to install Windows accordingly.

2.Once Windows has been installed, right click My Computer, then click Properties. Select Device Manager tab.

3.Double click PCI Mass Storage Controller listed under Other Devices.

4.Select Driver tab, then click Update Driver button.

5.Insert the driver CD, select Specify the location of the driver (Advanced), then click Next.

6.Check Specify a location, uncheck the other box, type D:\9X-Me, click Next. (Change D: to match your CD-ROM drive letter)

7.Click Next, then click Finish.

8.Remove the driver CD, restart Windows to complete.

11