Date & time

This setting determines the current date and time for the camera. This is usually done when you first set up the camera, but you may need to re-set the date and time when you are travelling to different time zones or when the batteries are out of the camera for more than10 minutes.

1In the Setup menu, select Date & Time.

2Follow the same procedure used in Setting the date and time on page 17.

Welcome screen

This setting determines the image that appears when the camera is turned on. You can select any image available in the camera or the HP logo, which is the default setting.

1In Playback mode, scroll to the image you want by using the buttons, then press OK to display the Main menu.

2In the Main menu, select the Setup option.

3In the Setup menu, select Welcome Screen.

4Select This Image to use the current image, HP Logo to return to the factory setting, or Exit to leave the current welcome screen unchanged.

5Press OK to activate the selection you made in the previous step.

38

hp photosmart 720 user’s manual