Turning on power
Turn the camera on by sliding the 
switch to the right and then releasing it. The Memory/USB light will blink and then turn off when the camera is ready.
AF
Restoring previous settings
Some of the camera settings do not remain set when the camera is turned off. To restore all camera settings that were in effect when the camera was last turned off, hold down the OK button when you turn on the camera.
Choosing the language
The first time you turn the camera on, the following screen appears and prompts you to choose a language.
1Scroll to the language that you
want by using the 
buttons.
2Press the OK button to select the highlighted language.
NOTE If you need to go back and
change this setting later, you can do this in the Setup menu. See Chapter 6: Using the setup menu on page 67.
18 | hp photosmart 730 series user’s manual |