5Removal and replacement procedures

Tablet component replacement procedures

CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

This chapter provides removal and replacement procedures for authorized service provider only parts.

There are as many as 13 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description

Spare part number

 

 

Back cover (includes six magnets attached with double-sided adhesive)

743202-001

 

 

7.0-in, HD, LED, TouchScreen, display panel assembly (includes display panel cable and

743205-001

TouchScreen cable)

 

 

 

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

Remove the back cover:

Tablet component replacement procedures

13