Remove the front-facing webcamera:

1.Remove the shield tape (1) that secures the front-facing webcamera cable to the display panel assembly.

NOTE: The shield tape is included in the I/O Hardware Kit, spare part number 745164-001.

2.Disconnect the front-facing webcamera cable (2) from the system board.

3.Detach the front-facing webcamera (3) from the display panel assembly. (The front-facing webcamera is attached to the display panel assembly with double-sided adhesive.)

4.Remove the front-facing webcamera and cable. Reverse this procedure to install the front-facing webcamera.

22

Chapter 5 Removal and replacement procedures