7.Remove the right speaker (4).

Reverse this procedure to install the speakers.

Rear-facing webcamera

Description

Spare part number

 

 

Rear-facing webcamera (includes cable)

743885-001

 

 

Before removing the rear-facing webcamera, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

4.Remove the back cover (see Back cover on page 13).

5.Remove the battery (see Battery on page 15).

Remove the rear-facing webcamera:

1.Remove the shield tape (1) that secures the rear-facing webcamera cable to the display panel assembly.

NOTE: The shield tape is included in the I/O Hardware Kit, spare part number 745164-001.

2.Disconnect the rear-facing webcamera cable (2) from the system board.

18

Chapter 5 Removal and replacement procedures