5Removal and replacement procedures

This chapter provides removal and replacement procedures for authorized service provider only parts.

CAUTION: Tablet components described in this chapter should only be accessed by an authorized service provider. Accessing these parts can damage the tablet and void the warranty.

NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions.

Tablet component replacement procedures

There are as many as 6 screws that must be removed, replaced, and/or loosened when servicing the tablet. Make special note of each screw size and location during removal and replacement.

Back cover

Description

Spare part number

 

 

Back cover (includes Wifi antenna)

785183-001

 

 

7-in (1280×720), IPS, 5-point capacitive, TouchScreen; includes display panel cable and

785188-001

TouchScreen cable display panel assembly

 

 

 

Before disassembling the tablet, follow these steps:

1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.

2.Disconnect the power from the tablet by unplugging the power cord from the tablet.

3.Disconnect all external devices from the tablet.

Remove the back cover:

CAUTION: Before positioning the tablet with the display panel facing down, make sure the work surface is clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in damage to the display panel assembly.

1.Place the tablet on a flat surface, display panel side down, with the power button and volume buttons toward you.

Tablet component replacement procedures 11