Remove the microphone:
1.Unsolder the microphone cables (1) from the system board terminals.
NOTE: When installing the microphone, the microphone red cable should be soldered to the system board “+” terminal, and the microphone black cable should be soldered to the
2.Release the microphone (2) from the retention molding built into the display panel assembly.
3.Remove the microphone and cable. Reverse this procedure to install the microphone.
Front-facing webcam
Description | Spare part number |
|
|
|
|
Before removing the
1.Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system.
2.Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.Disconnect all external devices from the tablet.
4.Remove the back cover (see Back cover on page 14).
5.Disconnect the battery cables from the system board (see Battery on page 16).
21 |
