HP 8000 manual Gtf, Vga, Svga, Xga, Sxga, Uxga

QuickSpecs

HP Compaq 8000 Elite PC

Technical Specifications - Graphics

HP ADD2 SDVO PCIe	Models		HP ADD2 SDVO DVI-D Out Adapter
DVI-D Adapter	Form Factor		Low-profile card
	DVI-D Connector		Digital connection only
	Dual Head Support		Yes, when used with the integrated VGA connector
	Display Devices		HP L1740
	Supported		HP L1940T
			HP L2045W
			HP LP1965
	NOTE: These graphics adapters offer optimal performance with any display that meets
	applicable VESA standards.
	Color Depth		All modes support 8-bpp, 16-bpp, and 24-bpp color depths
	Host Interface		Mechanically compliant with PCI-E standard
	Connector		Complies with the Intel ADD2 and Intel Serial Digital Video Output
			(SDVO) specifications
	Dot Clock		165 MHz maximum
	Display Modes		Supports display modes that require up to 165-MHz bandwidth on the
			link, as shown in the following table.
Resolution		60-Hz LCD		60-Hz	75-Hz	85-Hz
Blanking		5% reduced		GTF	GTF	GTF
640 x 480	VGA		Yes	Yes	Yes	Yes
800 x 600	SVGA		Yes	Yes	Yes	Yes
1024 x 768	XGA		Yes	Yes	Yes	Yes
1280 x 1024	SXGA		Yes	Yes	No	No
1600 x 1200	UXGA		Yes	Yes	No	No
HP DisplayPort to DVI-	Connectors		DisplayPort and DVI-D single link connector
D Adapter	Adapter length		7.5 in (19.0 cm)
	Adapter weight		.10 lbs (.05 kg)
HP DisplayPort to VGA	Connectors			DisplayPort and VGA connector
Adapter	Adapter length			8 in (20 cm)
	Adapter weight			.1 lbs (.06 kg)
	Maximum vertical refresh			85 Hz
	rate
	Display support			162 MHz RAMDAC
	Display max resolution			1600x1200
	HP DisplayPort to VGA adapter display resolutions and refresh rates

NOTE: Other resolutions may be available but are not recommended as they may not have been tested and qualified by HP. Using the HP DisplayPort to VGA Adapter may require an update to the graphics driver installed on your system. To install the most up-to-date graphics driver go to: www.hp.com.

DA - 13424 Worldwide QuickSpecs — Version 17 — 6/25/2010 Page 40