QuickSpecs
HP Compaq 8000 Elite PC
Technical Specifications - Removable Storage
HP | USB 2.0 | |
Reader (with 1394) | NOTE: Requires the USB cable to be connected to the internal | |
| ||
| USB 2.0 port or a USB 2.0 PCI card. | |
1394 Interface | Two | |
| to the pass through cable on the media card reader) | |
Advance protocol | Supports hardware ECC (Error Correction Code) function | |
support | Supports hardware CRC (Cyclic Redundancy Check) function | |
| Supports MS | |
| Supports | |
| Supports MS | |
| Supports SD | |
| Supports | |
| Supports | |
| Supports CF v4.0 with PIO mode 6 and Ultra DMA mode | |
Supported media type | CompactFlash Type I | |
| CompactFlash Type II | |
| Microdrive |
|
| MultiMediaCard (MMC) | |
| Reduced Size MultiMediaCard (RS MMC) | |
| MultiMediaCard 4.2 (MMC Plus, including MMC Plus HC) | |
| Reduced Size MultiMediaCard 4.2 (MMC Mobile, including MMC | |
| Mobile HC) |
|
| Secure Digital Card (SD) | |
| Secure Digital High Capacity (SDHC) | |
| miniSD |
|
| miniSD High Capacity | |
| Micro SD |
|
| Micro SD HC |
|
| Memory Stick |
|
| Memory Stick Select | |
| Memory Stick Duo (MS Duo) | |
| Memory Stick PRO (MS PRO) | |
| Memory Stick PRO Duo (MS PRO Duo) | |
| Memory Stick | |
| MagicGate Memory Stick (MG) | |
| MagicGate Memory Stick Duo | |
|
| |
Supported media type | Memory Stick Micro (M2) | |
with card adapter | MMC Micro |
|
Environmental | Operational | Test Parameters/Conditions - Power applied, |
| Environmental | unit operating on system ±5% |
| Extremes | nominal supply voltage. |
|
| 10°C 10% R.H. ≥ 24 hours |
|
| 10°C 90% R.H. ≥ 24 hours |
|
| 20°C 90% R.H. ≥ 24 hours |
|
| 30°C 90% R.H. ≥ 24 hours |
|
| 40°C 90% R.H. ≥ 24 hours |
|
| 50°C 90% R.H. ≥ 24 hours |
|
| 50°C 10% R.H. ≥ 24 hours |
| Storage Environmental Test Parameters/Conditions | |
| Extremes | 140°F (60°C) @ 80% R.H. for 96 hours |
|
| |
|
| No power applied |
|
| Delta °C < 1.0°C/min |
|
| Delta % R.H. < 1.5% R.H./min |
DA - 13424 Worldwide QuickSpecs — Version 17 — 6/25/2010 | Page 56 |