HP 8100 manual Feature Differences by Form Factor, Sff Cmt

System Overview

Table 2-1 shows the differences in features between the different PC series based on form factor:

Table 2-1

Feature Differences by Form Factor

	SFF	CMT
Processor types supported	Intel Core i5	Intel Core i5
Processor wattage (max)	95 W	95 W
Memory:
# & type of sockets	4 DDR3 UDIMMs	4 DDR3 UDIMMs
Maximum memory	16 GB	16 GB
Serial ports	1 std., 1 opt. [1]	1 std., 1 opt. [1]
Parallel ports	optional	optional
Drive bays:
Externally accessible	1 - 5.25”, 1 - 3.5” [9]	3 - 5.25” [7]
Internal	1 - 3.5”	3 - 5.25” [8]
Drive types supported	2 HDDs,	2 HDDs,
	1ODD,	2 ODDs,
	RAID1	RAID1
PCIe slots:	(all low profile)	(all full height)
x16 (graphics)	1 [2]	1 [4]
x4 (x16 connector)	1 [2]	1 [5]
x1 connector	1 [3]	1 [6]
PCI 2.3 32-bit 5-V slot, 25-watt maximum	1	3 full-height
Power Supply Unit:
Module type	internal	internal
power rating	240-watt	320-watt

NOTES:

[1]2nd serial port requires optional cable/bracket assembly.

[2]Low-profile, 25 W maximum.

[3]Low profile, 10-watt maximum

[4]Full-length;

75-watt maximum if PCIe x4 slot is not populated, 35-watt maximum if PCIe x4 slot is populated

[5]35-watt maximum

[6]Half-height, half-length, 10-watt maximum

[7]3.5” devices supported with adapters

[8]2.5” solid state drives supprted with adapter brackets

[9]Can hold a 2nd hard drive

Technical Reference Guide www.hp.com 2-3