Command Line Interface Reference Guide | vlan |
| |
■[no] vlan VLAN-IDip rip IP-ADDR
Specify the IP address the request is for.
Next Available Options:
■authentication-type< none text > -- Set authentication type used on this interface.(p. 718)
■authentication-key-- Set RIP authentication key (maximum 16 characters).(p. 717)
■metric < 1 to 15 > -- Set metric for this interface.(p. 734)
■poison-reverse-- Enable/disable poison reverse on this interface.(p. 741)
■receive < V1-only V2-only V1-or-V2 ... > -- Define RIP version for incoming packets.(p. 745)
■send < disabled V1-only V1-compatible-V2 ... > -- Define RIP version for outgoing packets.(p. 747)
■rip-compatible< V1-only V2-only V1-or-V2 > -- Define RIP version for incoming and outgoing packets.(p. 747)
■vlan VLAN-IDip pim-dense ip-addr
Usage: ip pim-dense [ip-addr IP-ADDRany]
Description: Set the source IP address for the PIM-DM packets sent out on this interface. You can either explicitly specify one of the existing VLAN's IP addresses or use 'any' option to dynamically determine it from the VLAN's current IP configuration. The default is 'any'. This command also enable the PIM-DM protocol on the VLAN interface.
Next Available Options:
■ip-addr-- Specify IP address. (IP-ADDR) (p. 729)
■any -- Dynamically determine IP address.(p. 716)
■vlan VLAN-IDip pim-dense ip-addr IP-ADDR
Specify IP address.
■vlan VLAN-IDip pim-sparse ip-addr
Usage: ip pim-sparse [ip-addr IP-ADDRany]
Description: Set the source IP address for the PIM-SM packets sent out on this
interface. You can either explicitly specify one of the existing VLAN's IP addresses or use 'any' option to dynamically determine it from the VLAN's current IP configuration. The default is 'any'. This command also enable the PIM-SM protocol on the VLAN interface.
Next Available Options:
■ip-addr-- Specify IP address. (IP-ADDR) (p. 729)
■any -- Dynamically determine IP address.(p. 716)
■vlan VLAN-IDip pim-sparse ip-addr IP-ADDR
Specify IP address.
■[no] vlan VLAN-ID vrrp vrid < 1 to 255 > virtual-ip-addressIP-ADDR/mask-LENGTH
Specify IP address/mask.
