Command Line Interface Reference Guide | vlan |
| |
■vlan VLAN-IDvrrp vrid < 1 to 255 > primary-ip-address IP-ADDR
Specify IP address.
ip-recv-mac-address
■[no] vlan VLAN-IDip-recv-mac-address
Usage: [no] ip-recv-mac-address <macaddress> interval <1-255>
Description: Associates a L3-mac-address with a VLAN. To associate L3-Mac-Address for a VLAN.
ip-recv-mac-address <mac-address> interval <1-255>
To associate L3-Mac-Address with a VLAN with default timeout interval of 60s.
ip-recv-mac-address <mac-address>
To disassociate L3-Mac_address with a VLAN. no ip-recv-mac-address
Parameters:
<mac-address> - The L3-mac-address to be associated with a VLAN.
interval - Specify L3-Mac-Address timeout interval.
<1-255> - Timeout interval in seconds <1-255>.
Next Available Option:
■mac-address-- The L3-mac-address to be associated with a VLAN. (MAC-ADDR) (p. 733)
ipv6
■vlan VLAN-IDipv6
Usage: [no] ipv6 ...
Description: Configure various IP parameters for the VLAN. The 'ipv6'
command must be followed by a feature-specific keyword. Use 'ipv6 ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly from the VLAN context or follow the 'vlan VLAN-ID' command.
Next Available Options:
■enable -- Enable IPv6 on an interface and configures an automatically generated link-local addr.(p. 723)
■address -- Set IPv6 parameters for communication within an IP network(p. 713)
■mld -- Enable/disable/configure IPv6 Multicast Listener Discovery (MLD) feature on a VLAN(p. 735)
■access-group-- Apply a IPV6 ACl on a VLAN (ASCII-STR) (p. 713)
■nd -- IPv6 nodes on the same link use Neighbor Discovery to discover each other's presence, link-layer addresses, routers and to maintain reachability information about the paths to active neighbors(p. 737)
ipv6-addr
■[no] vlan VLAN-IDipv6 address IPV6-ADDR
Configure a link-local IPv6 address.
