Command Line Interface Reference Guide

vlan

 

 

minadvertinterval

■vlan VLAN-IDip irdp minadvertinterval < 3 to 1800 >

Usage: [no] ip irdp minadvertinterval <3-1800>

Description: Set the minimum time (in seconds) allowed between sending unsolicited router advertisements. Must be no greater than the maximum time between sending unsolicited router advertisements.

Range: < 3 to 1800 >

mirror

■vlan VLAN-ID monitor all < In Out Both > mirror

Mirror destination.

Next Available Options:

■monitor_mirror_session_id < 1 to 4 > -- Mirror destination number.(p. 736)

■mirror_session_name -- Mirror destination name.(p. 735)

mirror_session_name

■[no] vlan VLAN-IDmonitor all < In Out Both > mirror

Mirror destination name.

mld

■[no] vlan VLAN-IDipv6 mld

Usage: [no] ipv6 mld [...]

Description: Enable/disable/configure IPv6 Multicast Listener Discovery (MLD)

feature on a VLAN. This command enables, disables or configures the MLD feature for MLD communication between Multicast Routers, Multicast Servers, and Multicast Clients connected to the device. This is a VLAN context command. If not preceded by 'no',

the command accepts a variety of configuration parameters. To get a list of all available parameters use 'ipv6 mld ?'. To get detailed help for a parameter follow it with 'help' keyword.

Example Commands:

ProCurve(vlan-8)# ipv6 mld forward a16-a18

ProCurve(vlan-8)# ipv6 mld blocked a19-a21

ProCurve(vlan-8)# show ipv6 mld vlan 8 config

Next Available Options:

■querier -- This command disables or re-enables the ability for the switch to become querier if necessary(p. 744)

■auto -- Instruct the device to monitor incoming multicast traffic on the specified ports (this is the default behavior) ([ethernet] PORT-LIST) (p. 719)

■blocked -- Instruct the device to drop incoming multicast packets received on the specified ports ([ethernet] PORT-LIST) (p. 720)

© 2009 Hewlett-Packard Development Company, L.P.

735