Command Line Interface Reference Guidevlan

solicitation requests sent for an unresolved destination,

or between duplicate address detection neighbor solicitation requests. When set to a non-default value, this is included in router advertisements as the ra-retranstime value.

Next Available Option:

■number < 1000 to 3600000 > -- Configures the neighbor discovery time between neighbor solicitation requests sent for an unresolved destination, or between duplicate address detection neighbor solicitation requests(p. 738)

number

■vlan VLAN-ID ip irdp preference < -2147483647 to 2147483647 >

The router preferability number. Higher values are more preferable.

Range: < -2147483647 to 2147483647 >

■vlan VLAN-ID ipv6 nd ns-interval< 1000 to 3600000 >

Usage: [no] ipv6 nd ns-interval <milliseconds>

Description: Configures the neighbor discovery time between neighbor solicitation requests sent for an unresolved destination, or between duplicate address detection neighbor solicitation requests. When set to a non-default value, this is included in router advertisements as the ra-retranstime value.

Range: < 1000 to 3600000 >

■vlan VLAN-IDipv6 nd reachable-time < 1000 to 3600000 >

Usage: [no] ipv6 nd ra-lifetime <seconds>

Description: Configures the router lifetime sent in router advertisements. A value of 0 tells hosts on the interface to not use this router as a default router.

Range: < 1000 to 3600000 >

ospf

■[no] vlan VLAN-IDip ospf

Usage: [no] ip ospf [...]

Description: Enable/disable/configure Open Shortest Path First (OSPF)

protocol on the VLAN interface.

Called without 'no', the command enables OSPF on the interface. Otherwise ('no' is specified), the command disables OSPF on the interface. The command can be followed by an OSPF configuration command. Use 'ip ospf ?' to get a list of all possible options. This is a VLAN context command. It can be called directly from the VLAN context or follow the 'vlan VLAN-ID'

command.

Next Available Options:

■passive -- Configures an ospf interface as passive. (p. 739)

■area -- Specify an OSPF area.(p. 716)

■authentication-key-- Set simple authentication method and key.(p. 717)

© 2009 Hewlett-Packard Development Company, L.P.

738