Command Line Interface Reference Guide

vlan

 

 

Range: < 1 to 600 >

preempt-mode

■[no] vlan VLAN-IDvrrp vrid < 1 to 255 > preempt-mode

Usage: [no] vrrp vrid <VRID> preempt-mode

Description: Enable/disable preempt mode for the virtual router instance. The default value is 'enabled'.

preference

■vlan VLAN-IDip irdp preference

Usage: [no] ip irdp preference <no-default<-2147483647-2147483647>>

Description: The preferability of the router as a default router, relative to the other routers on the same subnet. Higher values are more preferable.

Next Available Options:

■number < -2147483647 to 2147483647 > -- The router preferability number. Higher values are more preferable.(p. 738)

■no-default-- Indicates that the router should never be used as a default by its neighbors.(p. 737)

primary-ip-address

■vlan VLAN-IDvrrp vrid < 1 to 255 > primary-ip-address

Usage: [no] vrrp vrid <VRID> primary-ip-address <IP-ADDR lowest>

Description: Specify IP address the virtual router instance will use as a source in VRRP advertisement messages. If not set (i.e. is '0.0.0.0') the virtual router uses numerically lowest IP address of the VLAN. The default value is 'lowest'.

Next Available Options:

■ip-addr-- Specify IP address. (IP-ADDR) (p. 729)

■lowest -- Dynamically determine lowest IP address.(p. 733)

priority

■vlan VLAN-IDip ospf priority < 0 to 255 >

Set priority of this router as a designated router.

Range: < 0 to 255 >

■vlan VLAN-ID ip ospf IP-ADDR priority < 0 to 255 >

Set priority of this router as a designated router.

Range: < 0 to 255 >

■vlan VLAN-IDip ospf all priority < 0 to 255 >

Set priority of this router as a designated router.

© 2009 Hewlett-Packard Development Company, L.P.

742