Command Line Interface Reference Guidevlan
■ ip-addr-- Specify the IP address the request is for. (IP-ADDR) (p. 729) ■ all -- Process the request for all IP addresses.(p. 715)
rip-compatible
■vlan VLAN-ID ip rip < V1-only V2-only V1-or-V2 >
Define RIP version for incoming and outgoing packets.
Supported Values:
■V1-only-- Use RIP version 1 only.
■V2-only-- Use RIP version 2 only.
■V1-or-V2-- Use RIP 2 in the RIP 1 compatible mode.
■vlan VLAN-ID ip rip IP-ADDR < V1-only V2-only V1-or-V2 >
Define RIP version for incoming and outgoing packets.
Supported Values:
■V1-only-- Use RIP version 1 only.
■V2-only-- Use RIP version 2 only.
■V1-or-V2-- Use RIP 2 in the RIP 1 compatible mode.
■vlan VLAN-ID ip rip all < V1-only V2-only V1-or-V2 >
Define RIP version for incoming and outgoing packets.
Supported Values:
■V1-only-- Use RIP version 1 only.
■V2-only-- Use RIP version 2 only.
■V1-or-V2-- Use RIP 2 in the RIP 1 compatible mode.
send
■vlan VLAN-ID ip rip send < disabled V1-only V1-compatible-V2 ... >
Define RIP version for outgoing packets.
Supported Values:
■disabled -- Do not send RIP updates.
■V1-only-- Send RIP version 1 updates only.
■V1-compatible-V2-- Send RIP 2 updates using RFC 1058 route subsumption.
■V2-only-- Send RIP version 2 updates only.
■vlan VLAN-ID ip rip IP-ADDR send < disabled V1-only V1-compatible-V2 ... >
Define RIP version for outgoing packets.
Supported Values:
■disabled -- Do not send RIP updates.
■V1-only-- Send RIP version 1 updates only.
■V1-compatible-V2-- Send RIP 2 updates using RFC 1058 route subsumption.
■V2-only-- Send RIP version 2 updates only.
■vlan VLAN-ID ip rip all send < disabled V1-only V1-compatible-V2 ... >
Define RIP version for outgoing packets.
Supported Values:
■disabled -- Do not send RIP updates.