Command Line Interface Reference Guide | vlan |
| |
Supported Values:
■V1-only-- Accept RIP version 1 updates only.
■V2-only-- Accept RIP version 2 updates only.
■V1-or-V2-- Accept both RIP 1 and RIP 2 updates.
■disabled -- Do not accept RIP updates.
■vlan VLAN-ID ip rip all receive < V1-only V2-only V1-or-V2 ... >
Define RIP version for incoming packets.
Supported Values:
■V1-only-- Accept RIP version 1 updates only.
■V2-only-- Accept RIP version 2 updates only.
■V1-or-V2-- Accept both RIP 1 and RIP 2 updates.
■disabled -- Do not accept RIP updates.
retransmit-interval
■vlan VLAN-IDip ospf retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
■vlan VLAN-IDip ospf IP-ADDRretransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
■vlan VLAN-IDip ospf all retransmit-interval < 1 to 3600 >
Set retransmit interval in seconds; the default is 5.
Range: < 1 to 3600 >
rip
■[no] vlan VLAN-IDip rip
Usage: [no] ip rip [...]
Description: Enable/disable/configure Routing Internet Protocol (RIP)
on the VLAN interface.
Called without 'no', the command enables RIP on the interface. Otherwise ('no' is specified), the command disables RIP on the interface. The command can be followed by a RIP configuration command. Use 'ip rip ?' to get a list of all possible options. This is a VLAN context command. It can be called directly from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■authentication-type< none text > -- Set authentication type used on this interface.(p. 718)
■authentication-key-- Set RIP authentication key (maximum 16 characters).(p. 717)
■metric < 1 to 15 > -- Set metric for this interface.(p. 734)
■poison-reverse-- Enable/disable poison reverse on this interface.(p. 741)
■receive < V1-only V2-only V1-or-V2 ... > -- Define RIP version for incoming packets.(p. 745)
■send < disabled V1-only V1-compatible-V2 ... > -- Define RIP version for outgoing packets.(p. 747)
■rip-compatible< V1-only V2-only V1-or-V2 > -- Define RIP version for incoming and outgoing packets.(p. 747)
