Command Line Interface Reference Guidevlan

■ V1-only-- Send RIP version 1 updates only.

■ V1-compatible-V2-- Send RIP 2 updates using RFC 1058 route subsumption. ■ V2-only-- Send RIP version 2 updates only.

service-policy

■[no] vlan VLAN-IDservice-policy SERVICE-POLICY

Usage: [no] service-policy <name> in

Description: Apply the QoS/Mirror policy on the vlan.

Parameters:

o <name> - Policy name.

o in - Apply the policy in inbound direction.

Next Available Option:

■in -- Apply policy on inbound packets. (p. 728)

src-ip

■vlan VLAN-IDconnection-rate-filter unblock IP-ADDR/mask-LENGTH

Match packets from the specified subnet.

tagged

■[no] vlan VLAN-ID tagged [ETHERNET] PORT-LIST

Usage: [no] tagged [ethernet] PORT-LIST

Description: Assign ports to current VLAN as tagged.

This is a VLAN context command. It can be called directly from the VLAN context or follow the 'vlan VLAN-ID' command.

timer-interval

■vlan VLAN-IDip-recv-mac-address MAC-ADDRinterval < 1 to 255 >

Timeout interval in seconds <1-255>.

Range: < 1 to 255 >

track

■[no] vlan VLAN-IDvrrp vrid < 1 to 255 > track

Usage: [no] vrrp vrid <VRID> track <vlan <VLAN-ID-RANGE>interface <LPORT-LIST>> no vrrp vrid <VRID> track

Description: Enable/disable tracking for VR.

Next Available Options:

■interface -- Enable/disable tracking of logical ports for VR(p. 728)

■vlan -- Enable/disable tracking of VLANs for VR(p. 750)

© 2009 Hewlett-Packard Development Company, L.P.

748