Command Line Interface Reference Guide | vlan |
| |
Usage: [no] ip pim-dense [...]
Description: Enable/disable/configure PIM-DM protocol on the VLAN interface. Use direct and 'no' versions of the command to enable/disable PIM-DM on the interface. Use 'ip pim-dense ?' to get the list of all configuration options. This command can be used in the VLAN context or in the global context with the 'vlan <VLAN-ID>' prefix.
Next Available Options:
■ip-addr-- Set the source IP address for the PIM-DM packets sent out on this interface(p. 729)
■lan-prune-delay-- Turn on/off the LAN Prune Delay Option on this interface(p. 733)
■hello-interval< 5 to 300 > -- Set the frequency at which PIM Hello messages are transmitted on this interface(p. 725)
■hello-delay< 0 to 5 > -- Set the maximum time before a triggered PIM Hello message is transmitted on this interface(p. 725)
■graft-retry-interval< 1 to 10 > -- Set the interval a PIM router waits for a Graft Ack before resending a Graft on this interface(p. 725)
■max-graft-retries< 1 to 10 > -- Set the maximum number of times this router will resend a Graft on this interface(p. 734)
■override-interval< 500 to 6000 > -- Set the value inserted into the Override Interval field of a LAN Prune Delay option on this interface(p. 739)
■propagation-delay< 250 to 2000 > -- Set the value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface(p. 743)
■ttl-threshold< 0 to 255 > -- Set the Time To Live in a PIM-DM State Refresh message at which it is not forwarded on this interface(p. 749)
pim-sparse
■[no] vlan VLAN-IDip pim-sparse
Usage: [no] ip pim-sparse [...]
Description: Enable/disable/configure PIM-SM protocol on the VLAN interface. Use direct and 'no' versions of the command to enable/disable PIM-SM on the interface. Use 'ip pim-sparse ?' to get the list of all configuration options. This command can be used in the VLAN context or in the global context with the 'vlan <VLAN-ID>' prefix.
Next Available Options:
■ip-addr-- Set the source IP address for the PIM-SM packets sent out on this interface(p. 729)
■lan-prune-delay-- Turn on/off the LAN Prune Delay Option on this interface(p. 733)
■hello-interval< 5 to 300 > -- Set the frequency at which PIM Hello messages are transmitted on this interface(p. 725)
■hello-delay< 0 to 5 > -- Set the maximum time before a triggered PIM Hello message is transmitted on this interface(p. 725)
■override-interval< 500 to 6000 > -- Set the value inserted into the Override Interval field of a LAN Prune Delay option on this interface(p. 739)
■propagation-delay< 250 to 2000 > -- Set the value inserted into the LAN Prune Delay field of a LAN Prune Delay option on this interface(p. 743)
■dr-priority-- Set the priority value to use on the interface in the Designated Router election process(p. 722)
■nbr-timeout< 60 to 8000 > -- Set the neighbour loss time interval for this interface(p. 737)
