Command Line Interface Reference Guide | vlan |
| |
■authentication -- Disable authentication.(p. 717)
■md5-auth-key-chain-- Set MD5 authentication method and key chain.(p. 734)
■cost < 1 to 65535 > -- Set metric of this interface.(p. 721)
■dead-interval< 1 to 65535 > -- Set dead interval in seconds; the default is 40.(p. 721)
■hello-interval< 1 to 65535 > -- Set hello interval in seconds; the default is 10.(p. 725)
■priority < 0 to 255 > -- Set priority of this router as a designated router.(p. 742)
■retransmit-interval< 1 to 3600 > -- Set retransmit interval in seconds; the default is 5.(p. 746)
■transit-delay< 1 to 3600 > -- Set transit delay in seconds; the default is 1.(p. 749)
■ip-addr-- Specify the IP address the request is for. (IP-ADDR) (p. 729)
■all -- Process the request for all IP addresses.(p. 715)
override-interval
■vlan VLAN-IDip pim-dense override-interval < 500 to 6000 >
Usage: ip pim-dense override-interval <500-6000>
Description: Set the value inserted into the Override Interval field of a LAN Prune Delay option on this interface. Default is 2500 milliseconds.
Range: < 500 to 6000 >
■vlan VLAN-IDip pim-sparse override-interval < 500 to 6000 >
Usage: ip pim-sparse override-interval <500-6000>
Description: Set the value inserted into the Override Interval field of a LAN Prune Delay option on this interface. Default is 2500 milliseconds.
Range: < 500 to 6000 >
owner
■vlan VLAN-ID vrrp vrid < 1 to 255 > owner
Usage: vrrp vrid <VRID> owner
Description: Designate the virtual router instance as an Owner (Master). There is no default value.
passive
■[no] vlan VLAN-IDip ospf passive
Configures an ospf interface as passive.
■[no] vlan VLAN-IDip ospf IP-ADDRpassive
Configures an ospf interface as passive.
■[no] vlan VLAN-IDip ospf all passive
Configures an ospf interface as passive.
pim-dense
■[no] vlan VLAN-IDip pim-dense
