HP 8200ZL 738

Command Line Interface Reference Guide	vlan

■forward -- Instruct the device to forward incoming multicast packets received on the specified ports ([ethernet] PORT-LIST) (p. 724)

■fastleave -- Enables MLD fast-leaves on the specified ports in the selected VLAN ([ethernet] PORT-LIST) (p. 723)

■forcedfastleave -- Enables MLD Forced Fast-Leave on the specified ports in the selected VLAN, even if they are cascaded ([ethernet] PORT-LIST) (p. 724)

monitor

■[no] vlan VLAN-IDmonitor

Usage: 1) [no] monitor all <inoutboth> mirror <1-4 NAME-STR>

[1-4 NAME-STR]...

2)[no] monitor ip access-group <ACL-NAME> <in> mirror <1-4 NAME-STR> [1-4 NAME-STR]...

Description: Define either the VLAN is to be monitored or not.

The network traffic seen by the monitored VLAN is copied to the Mirroring Destination to which a network analyzer can be attached.

Note: When mirroring a VLAN in a busy network,

some frames may not be copied to the mirroring port.

This is an VLAN context command. It can be called directly from the VLAN context or follow the 'vlan VLAN-ID command.

Parameters: o 1-4 - Mirror destination number

o NAME-STR - Friendly name associated with the mirror destination number.

o ACL-NAME - Standard or Extended Access Control List number. o <inoutboth> direction of the traffic to be monitored.

Next Available Option:

■all < In Out Both > -- Monitor all traffic.(p. 715)

monitor_mirror_session_id

■[no] vlan VLAN-ID monitor all < In Out Both > mirror < 1 to 4 >

Mirror destination number.

Range: < 1 to 4 >

mroute

■vlan VLAN-IDip mroute

Usage: ip mroute ...

Description: Configure IP Multicast Routing parameters on the VLAN

interface. The command must be followed by a parameter. Use 'ip mroute ?' to get a list of all possible parameters. This is a VLAN context command. It can be called directly from the VLAN context or follow the 'vlan VLAN-ID' command.

Next Available Option:

■ttl-threshold< 0 to 255 > -- Set the multicast datagram TTL threshold for the interface(p. 749)

736