Bluetooth
•• Bluetooth profiles: A2DP, AVRCP
•• Bluetooth version: 3.0 + EDR
Main unit
•• Power supply:
•• Power consumption: 20 W
•• Standby power consumption: ≤ 0.5 W
•Speaker impedance: 4 ohm
•Speaker drivers: 2 x racetrack mid range (1.5" x 5") + 2 x 1" tweeter + 1 x 4" woofer
•• Dimensions (WxHxD): 701 x 68 x 325 mm
•• Weight: 6.3 kg
•Operating temperature and humidity: 0°C to 45°C, 5% to 90% humidity for all climates
•• Storage temperature and humidity:
Remote control batteries
•1 x CR2025
8 Troubleshooting
Warning
•• Risk of electric shock. Never remove the casing of the product.
To keep the warranty valid, never try to repair the product yourself.
If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www.philips.com/support.
Main unit
The buttons on the SoundStage do not work.
•Disconnect the SoundStage from the power supply for a few minutes, then reconnect.
Sound
No sound from SoundStage speakers.
•Connect the audio cable from your SoundStage to your TV or other devices. However, you do not need a separate audio connection when the SoundStage and TV are connected through HDMI ARC connection.
•Reset your SoundStage to its factory settings.
•On the remote control, select the correct audio input.
•Make sure that the SoundStage is not muted.
Distorted sound or echo.
•If you play audio from the TV through the SoundStage, make sure that the TV is muted.
EN 13
