Update software, Auto standby | Philips HTL4110B specs

In standby mode, press and hold button on the main unit for at least 5 seconds until the product powers on.

Note

•• This product may not be compatible with certain types of USB storage device.

•• If you use a USB extension cable, USB HUB, or USB multi-reader, the USB storage device may not be recognized.

•• Digital camera PTP protocols are not supported.

•• Do not remove the USB storage device while it is being read.

•• DRM-protected music files (MP3, WMA) are not supported.

•• Support a USB port: 5V , 1A.

Auto standby

When playing media from a connected device, the SoundStage automatically switches to standby if:

•no button is pressed for 30 minutes, or

•no audio/video play from a connected device (except USB) for 30 minutes.

You can reset this product to the default settings programmed at the factory.

To get the best features and support, update your product with the latest software.

1	In any source mode, press .
2	Press AUX/AUDIO IN twice on the

remote control.

»»The software version number is displayed.

1 Check the latest software version on www.philips.com/support.

• Search for your model and click on "Software and drivers".

2 Download the software into a USB storage device.

AUnzip the download if zipped, and make sure that the unzipped folder is named "HTL4110B_12.BIN".

BPut the "HTL4110B_12.BIN" folder in the root directory.

3 Connect the USB storage device to the USB connector of this product.

4 Press USB on the remote control, within 5 seconds presstwice, and VOL + once, then hold down.

»»If an upgrade file is detected, [UPG] will be fast flashed.

»»If an upgrade file is not detected, [ERROR] will be slowly flashed.

5 Pressto start the update.

»»[UPG] is displayed.

EN 11