Adjust the volume, Choose your sound, MP3 player

Press TREBLE +/- or BASS +/- to change the treble or bass level.

Press SURR repeatedly to select surround mode or stereo mode.

Press NIGHT MODE to turn night mode on or off.

5Use your SoundStage

This section helps you use the SoundStage to play media from a wide range of sources.

Before you start

•Make the necessary connections described in Quick start guide and User manual.

•Switch the TV to the correct source for the SoundStage.

Adjust the volume

1 Rotate the power knob or press VOLUME +/- on remote control to increase or decrease a volume level.

•To mute sound, press .

•To restore the sound, press again or press VOLUME +/-.

Choose your sound

This section helps you choose the ideal sound for your video or music.

Surround sound mode

Experience an immersive audio experience with surround sound modes.

Equalizer

Change the high frequency (treble) and low frequency (bass) settings of the SoundStage.

Night mode

For quiet listening, night mode decreases the volume of loud sounds when audio is played. Night mode is only available for Dolby Digital soundtracks.

MP3 player

Connect your MP3 player to play your audio files or music.

What you need

• An MP3 player.

• A 3.5mm stereo audio cable.

1 Using the 3.5mm stereo audio cable, connect the MP3 player to the AUDIO IN connector on your SoundStage.

2 Press AUDIO IN on the remote control.

3 Press the buttons on the MP3 player to select and play audio files or music.

Play audio through Bluetooth

Through Bluetooth, connect the SoundStage with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your SoundStage.