Philips HTL4110B user manual Play music via NFC, USB storage devices

2 On the Bluetooth device, switch on Bluetooth, search for and select PhilipsHTL4110B to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).

3 Wait until you hear a beep sound from the SoundStage.

»»[BT] is displayed.

»»If the connection fails, [BT] is flashed.

4 Select and play audio files or music on your Bluetooth device.

	• During play, if a call is coming, music
	play is paused. Play resumes when the
	call ends.
	• If your Bluetooth device supports
	AVRCP profile, on the remote control
	you can press		/ to skip to a track,
5	or press	to pause/resume play.
	To exit Bluetooth, select other source.

•When your switch back to Bluetooth mode, Bluetooth connection remains active.

Note

•• The music streaming may be interrupted by obstacles between the device and SoundStage, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.

•• If you want to connect your SoundStage with another Bluetooth device, press and hold Bluetooth on the remote control to disconnect the currently connected Bluetooth device.

Play music via NFC

NFC (Near Field Communication) is a technology that enables short-range wireless communication between NFC-enabled devices, such as mobile phones.

What you need

•A Bluetooth device with NFC function.

•For pairing, tap the NFC device on the NFC tag of this product.

• The operational range between the main unit (left and right speakers) and a NFC device is approximately 10 meters (30 feet).

1 Enable NFC on your Bluetooth device (see the user manual of your device for details).

2 Tap the NFC device on the NFC tag of this product until you hear a beep sound from this product.

»»The NFC device is connected to this product via Bluetooth. [BT] is displayed.

3 Select and play audio files or music on your NFC device.

•To break the connection, tap the NFC device with the NFC tag on this product again.

USB storage devices

Enjoy audio on a USB storage device, such as an MP3 player and USB flash memory, etc.

What you need

• A USB storage device that is formatted for FAT or NTFS file systems, and complies with the Mass Storage Class.

• A USB extension cable, if the USB storage device does not fit into the connector.

• An MP3 or WMA file on a USB storage device.

1 Connect a USB storage device to the SoundStage.

2 Press USB on the remote control.

»»[USB] is displayed.

3 Use the remote control to control play.

Button Action

Start, pause or resume play.

/ Skip to the previous or next track.

10EN