Installation

Important

It is essential that the lower cupboard is constructed in the manner illustrated i.e. having side, back, and roof panels so joined as to provide no apertures which could permit access to the oven unit when installed.

1. General

The appliance is designed for mounting at a safe level into an oven housing which must be secured to the backing wall.

2.Ventilation

a.The oven housing unit cabinet dimensions must comply with fig. 4.

b.An air gap of 50mm minimum must be provided at the rear of any top or bottom cupboards or shelves (see fig. 1).

c.It is necessary that the cabinets are provided with unobstructed ventilation, i.e. from adjacent cabinetry. This can be done by either raising the base of the cabinets using the adjusting feet (or spacers) or alternatively by providing a slot in the cabinet plinth to the dimensions in fig. 1.

d.The air gap at rear allows the warmed air to pass out of the inner cabinet space. Where it is intended to fit cupboards above the oven unit to ceiling height, it is essential that the warmed air is exhausted through the front of the cabinet (see fig. 1).

e.If an oven unit is installed adjacent to a tall cabinet, steam escaping from the oven when the door is opened could condense on and maybe stain the adjacent surface. To prevent permanent staining, the adjacent surface should be made of a material that is heat resisting and easy to clean. Adjacent tall cabinets should not be deeper than the oven housing cabinet.

3.Final Installation

a.Using a spirit level, check that the housing cabinet is level from side to side and from front to back in its installed position.

b.Correct any unevenness by placing spacers under the bottom of the cabinet. Make sure that the cabinet rests firmly on the floor without rocking.

c.Before the oven is fitted, the cabinet must be firmly secured to the backing wall for stability.

d.The oven unit should now be lifted (this is a two person lift) into the cabinet and pushed fully home.

e.Finally, the oven is secured to the cabinet by means of the four Phillips C/SK screws - two through each side trim.

f.Remove all packaging material from the grill and oven interior.

List of loose items:

4 x Phillips C/SK No. 6 x 25mm screws.

30

Page 29 Page 31
Page 30
Image 30
Hotpoint S130E Mk2 manual General, Ventilation, Final Installation, List of loose items
Page 29 Page 31

S130E Mk2 specifications

The Hotpoint S130E Mk2 is a versatile and efficient freestanding cooker that combines modern technology with user-friendly design, making it a popular choice for households looking to enhance their cooking experience. Known for its reliability, this cooker offers a range of features that cater to both novice cooks and experienced chefs alike.

One of the standout characteristics of the S130E Mk2 is its dual fuel functionality. This model combines a traditional gas hob with an electric oven, allowing for precise temperature control and even cooking results. The four-burner gas hob is equipped with various burner sizes, which accommodate different cooking styles, from simmering delicate sauces to boiling larger pots of water quickly.

The main oven of the cooker boasts a spacious capacity, ensuring that users have ample room for roasting large cuts of meat or baking multiple trays of cookies at once. With an impressive energy rating, the S130E Mk2 not only delivers performance but also excels in energy efficiency, helping to reduce utility bills while being environmentally friendly.

Hotpoint has incorporated several innovative technologies into the S130E Mk2. The Easy Clean enamel interior allows for hassle-free maintenance, as it inhibits grease and grime buildup within the oven. The smart control knobs are designed for ease of use, providing precise heat control while ensuring safety during operation. Additionally, the automatic ignition feature simplifies the lighting of the gas burners, promoting a safer cooking environment.

For those who enjoy baking, the S130E Mk2 offers a multifunctional oven setting that includes a fan-assisted option, ensuring even heat distribution. This feature is particularly beneficial for baking tasks, as it avoids uneven cooking and enables the creation of perfectly risen cakes and pastries.

The design of the S130E Mk2 is both stylish and practical, featuring a sleek stainless steel finish that complements various kitchen decors. Its compact size makes it suitable for smaller kitchens without compromising on functionality or cooking power.

Overall, the Hotpoint S130E Mk2 is a reliable and efficient cooker that combines an array of thoughtful features and innovative technologies, making it an excellent addition to any kitchen. Whether you are preparing a simple family meal or indulging in adventurous cooking, this cooker is designed to meet your culinary needs with ease and efficiency.
Top Page Image Contents