Hotpoint S130E Mk2 manual Something Wrong?, Problem, Check, There May Be Nothing Wrong

Something Wrong?

Before calling a Service Engineer, please check through the following lists.

THERE MAY BE NOTHING WRONG.

Problem	Check
Slight odour or small amount of	This is normal and should cease after a short period.
smoke when grill / oven used
first time
Nothing works.	If you find that the timer display is blank, then it is likely that
	there is no electricity supply to your oven. Check:
	(i) That the main cooker wall is switched on
	(ii) Other appliances, to see if you have had a power cut
	(iii) The main circuit breaker for the property
Display shows 0.00 AUTO.	The power supply to your oven has possibly been interrupted, but
	has now come back on again. Reset the timer to the correct time
	of day and “Manual” operation using instructions given in the timer
	section of the book.
Main Oven does not work, but	Your timer may be set for an Auto Cooking programme:
the Grill and Top Oven Work.	Check the timer to see whether "Auto" is lit or flashing. If it is
	then please follow the instructions given in the Timer section of
	this book to return the timer to Manual operation.
Top Oven and Grill do not work,	Operating the cooker under the following conditions may cause a
but the Main Oven works.	safety device to operate:
	(a) Grilling with the door closed - Always grill with the door fully
	open.
	(b) Grilling for an excessively long period at maximum setting - see
	Grilling guide.
	Switch off appliance and allow to cool for approx 30 mins. Switch the
	cooker back on and check that the Grill / Top oven is now operating.
Grill keeps turning on and off.	When the Grill control is operating at less than its maximum
	setting, the Grill will cycle on and off, this is normal and not a
	fault.
Grilling is uneven	Ensure that Grill pan has been positioned as stated in
	the Grilling section of this book.
Can not set an “Auto Cook”	Remember: "Cook Period" is the actual length of time for which,
programme	the timer will switch the oven(s) on as part of an "Auto Cooking"
	programme.
Draught from beneath control	A gentle flow of air will be blown from beneath the control panel
panel.	when the appliance is used. If the appliance is still warm, this
	cooling fan may run on, or restart itself after all of the controls
	have been turned off.
	The fan will stop once the appliance has been cooled. This is
	normal and not a fault.
Timer buzzer/bleeper operates	To silencethe Buzzer/Bleeper, press thr minute minder button.
continually

33