Command Line Interface Reference Guide

console

 

 

■XON/XOFF

■None

inactivity-timer

■console inactivity-timer < 0 1 5 ... >

Usage: console inactivity-timer <0151015203060120>

Description: Set the number of minutes of no activity detected on the Console port before the switch terminates a communication session. '0' means disable inactivity timer.

Default is 0.

Supported Values:

■0

■1

■5

■10

■15

■20

■30

■60

■120

local-terminal

■console local-terminal < VT100 NONE ANSI >

Usage: console local-terminal <vt100ansinone>

Description: Set type of terminal being used for the current console or telnet session (default is vt100).

Takes effect immediately. Not saved in configuration.

Terminal type options are:

vt100 = use VT100 terminal escape sequences. ansi = use ANSI terminal escape sequences.

none = use a raw mode with no terminal escape sequences. Useful for scripting.

See also 'console terminal help'.

Supported Values:

■VT100 -- VT-100 terminal compatible.

■NONE -- Raw mode with terminal escape sequences removed.

■ANSI -- ANSI terminal compatible.

screen-refresh

■console screen-refresh < 1 3 5 ... >

Usage: console screen-refresh <1351020304560>

Description: Set default number of seconds before screen is refreshed on the repeat command. See 'repeat help' for details on the 'repeat' command.

Supported Values:

■1

© 2009 Hewlett-Packard Development Company, L.P.

94