Appendix B:

Camera dock

NOTE The HP Camera Dock does not work without AC power. Be sure to use ONLY the HP AC adapter and the cables that came with the Camera Dock.

1Follow the setup instructions provided with the Camera Dock. This includes installing the Dock Insert onto the dock, installing (optional) rechargeable batteries in the camera, connecting the AC power source, and connecting the Camera Dock to a computer, printer, and/or television.

2Remove any cables that may be attached to the camera before putting it in the dock.

3Place the camera in the Camera Dock with the rear of the camera facing the front of the Camera Dock.

The Camera Dock has three I/O connectors on the back:

—Connects to the television

—Connects directly to USB-enabled HP DeskJet and Photosmart printers

—Connects to your computer

There is a sliding door over the printer and computer connectors that prevents you from using both connectors at the same time (the Camera Dock is not a USB hub).

Appendix B: Camera dock

95

Page 95
Image 95
HP 850 manual Appendix B Camera dock