Bluetooth module

NOTE: The Bluetooth module spare part kits do not include a Bluetooth module cable. The Bluetooth module cable is included in the Cable Kit, spare part number 452198-001. See Cable Kit on page 28 for more Cable Kit spare part number information.

Description

Spare part number

 

 

For use in all countries and regions except Japan and Asia Pacific countries and regions

398393-002

 

 

For use in all countries and regions except Japan and Asia Pacific countries and regions

452196-001

 

 

For use only in Japan and Asia Pacific countries and regions

450066-001

 

 

Before removing the Bluetooth module, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 46).

5. Remove the hard drive (see Hard drive on page 50).

Remove the Bluetooth® module:

1. Position the computer with the front toward you.

2. Release the Bluetooth module (1) from the clip in the hard drive bay by sliding it to the right.

3. Remove the Bluetooth module (2) from the hard drive bay by lifting it straight up.

4. Disconnect the Bluetooth module cable (3) from the Bluetooth module.

Reverse this procedure to reassemble and install the Bluetooth module.

Component replacement procedures 53