Display assembly

DescriptionSpare part number

Display assemblies for use with computer models equipped with WLAN and WWAN capability (includes 3 WLAN antenna transceivers and cables and 2 WWAN antenna transceivers and cables)

15.4-inch, WUXGA

452212-001

 

 

15.4-inch, WSXGA+

452211-001

 

 

15.4-inch, WXGA

452210-001

Display assemblies for use with computer models equipped with only WLAN capability (includes 3 WLAN antenna transceivers and cables)

15.4-inch, WUXGA

452209-001

 

 

15.4-inch, WSXGA+

452208-001

 

 

15.4-inch, WXGA

452207-001

 

 

Before removing the display assembly, follow these steps:

1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2. Disconnect all external devices connected to the computer.

3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4. Remove the battery (see Battery on page 46).

5. Disconnect the wireless antenna cables from the WLAN module (see WLAN module on page 70) and the WWAN module (see WWAN module on page 60).

6. Remove the following components:

a. Keyboard (see Keyboard on page 58)

b. Switch cover (see Switch cover on page 72)

Remove the display assembly:

1. Disconnect the display panel cable (1) from the system board.

76 Chapter 4 Removal and replacement procedures