2.Click Add.
Figure 75 Adding a local user
3.Configure a local user, as described in Table 19.
4.Click Apply.
Table 19 Configuration items
Item | Description | |
User | Enter the username of the local user. | |
The username can contain spaces in the middle. However, the device ignores any leading spaces | ||
Name | ||
in the username. | ||
| ||
|
| |
| Set the user privilege level of a user. For more information, see "User levels." | |
User | IMPORTANT: | |
Privilege | • The user privilege levels apply only to Web, FTP, Telnet, and SSH users. | |
Level | • Users that use the root virtual device and users that use other virtual devices have different | |
| ||
| privilege levels. For more information, see "Web overview." | |
|
| |
| Set the service type that a user can use, including Web, FTP, SSH, Telnet, Terminal, DVPN, and | |
Service | PPP. | |
Support for service types depends on the device model. For more information, see Table 20. | ||
Type | ||
You must configure a service type for each user for local authentication. Otherwise, user | ||
| ||
| authentication fails. | |
|
| |
Password | Set and confirm the password. The confirm password must be the same as the previously set | |
Confirm | password. | |
| ||
Password | Any leading spaces in the password are ignored. | |
|
| |
Password | Specify the password encryption method: | |
• Reversible: The device encrypts user passwords with a reversible encryption algorithm. | ||
Encryption | ||
• Irreversible: The device encrypts user passwords with an irreversible encryption algorithm. | ||
| ||
|
|
111