Figure 41 Connecting the AUX port to a terminal

3.If the PC is off, turn on the PC.

4.Launch the terminal emulation program and configure the communication properties on the PC. Figure 42 through Figure 44 show the configuration procedure on Windows XP HyperTerminal.

Make sure the port settings are the same as the common AUX port settings on the device. If the default settings are used, see Table 9.

On Windows Server 2003, add the HyperTerminal program first, and then log in to and manage the device as described in this document. On Windows Server 2008, Windows 7, Windows Vista, or some other operating system, obtain a third-party terminal control program first, and then follow the user guide or online help of that program to log in to the device.

Figure 42 Connection description

47