HP 8800 Router Displaying and maintaining CLI, Saving the running configuration

Changing the level of a command

Every command in a view has a default command level. The default command level scheme is sufficient for the security and ease of maintenance requirements of most networks. If you want to change the level of a command, make sure the change does not result in any security risk or maintenance problem.

To change the level of a command:

Step		Command	Remarks
1.	Enter system view.	system-view	N/A
2.	Change the level of a	command-privilege level level view	See Table 28 for the default
	command in a specific view.	view command	settings.

Saving the running configuration

You can use the save command in any view to save all submitted and executed commands into the configuration file. Commands saved in the configuration file can survive a reboot. The save command does not take effect on one-time commands, including display and reset commands. One-time commands are never saved.

Displaying and maintaining CLI

Task	Command	Remarks
Display the command keyword	display command-alias [ { begin	Available in any view.
alias configuration.	exclude include } regular-expression]
Display data in the clipboard.	display clipboard [ { begin exclude	Available in any view.
	include } regular-expression ]

139