1Setting Up Your Printer with a USB Cable
2Remove a stack of paper from its packaging. (Make sure all the paper in the stack is the same size and type.) Tap the stack on a flat surface to even it up.
3Put the paper into the IN tray, print
side down. You can insert up to 10 mm or 3/8 inch at a time.
4 Push the paper toward the back of the paper tray until it stops.
6410007
5Slide both paper adjusters to fit snug against the paper’s edges.
make sure the paper lies flat in the tray and that the paper fits under the tab of the
6 Slide the IN tray all the way back in.
If it is up, flip the OUT tray back down.
Print Side Down
6410008
Most paper prints better on one side than on the other. This is especially true for coated or specially treated paper. The print side is usually indicated on the paper package. Be sure you insert the paper into the IN tray of the printer with the print
side down.
For More Information:
Go to “Printing Cards” on page 46 for information on how to load
17