PRODUCT SPECIFICATIONS
| Electrical Requirements |
| 110 V~, 60 Hz, 2 A |
|
| Indicators |
| Red LED - Power |
|
|
|
| Green LED - Ready |
|
| External Fuse |
| 3.15A250V Glass Tube |
|
| Motor |
| Synchronous |
|
| Power Plug |
| 3 Prong, Grounded |
|
| Maximum Laminating Width |
| 12” |
|
| Maximum Document Thickness |
| .6mm (.024”) |
|
| Maximum Film Thickness |
|
| |
| Laminating Speed |
| Approx. 12” Per Minute |
|
| Heat Dial Increments |
| 1 To 10 |
|
| Warm Up Time |
| 5 to 10 Minutes |
|
| Maximum Temperature |
| 350° Fahrenheit |
|
| Overall Dimensions |
| 18” L x |
|
| Weight |
| 8.4 Pounds |
|
|
|
|
|
|
|
| UNPACKING | ||
When unpacking, check to make sure all the parts shown on the Parts List on page 11 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible.
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1.Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. Keep the work area well lit. Always keep the work area free of obstruc- tions, grease, oil, trash, and other debris.
SKU 92500 | For technical questions, please call | PAGE 2 |