To change the Manual White Balance setting:

1Point the camera at a white or gray target (such as a piece of paper), making sure that the region inside the focus brackets encompasses the white or gray target.

2Press the Shutter button (the camera will not take a picture). The camera then calculates a custom White Balance setting based on the region inside the focus brackets. During the calculation, PROCESSING... is displayed on the screen. When the calculation is complete, the color tint in Live View changes to match the new Manual White Balance setting, and WHITE BALANCE SET is displayed.

3If needed, repeat steps 1 and 2 until you get the desired Manual White Balance setting.

4When you are satisfied with the Manual setting you have made, press the OK button to exit the Manual White Balance screen and return to the Capture menu.

AE Metering

This setting allows you to specify which region of a scene the camera will use to calculate the exposure.

1In the Capture menu (page 40), select AE Metering.

2In the AE Metering menu, use the

buttons to highlight a setting.

3Press OK to save the setting and return to the Capture menu.

Chapter 2: Taking Pictures and Recording Video Clips

45