Chapter 5:

Unloading, Printing, and

Displaying Images

Unloading Images to a

Computer

NOTE You can also use the optional HP 8881 camera dock to do this task. See Appendix B: Camera Dock on

page 129.

1Confirm the following:

The HP Photo & Imaging software is installed on your computer (see Installing the Software on page 20).

If you are using a Macintosh computer, the camera’s USB Configuration is set to Disk Drive in the Setup menu (see USB Configuration on page 88.)

2Turn off the camera.

3Your camera came with a

special USB cable for connecting the camera to a computer. Connect the larger end of that USB cable to the computer.

4 Open the rubber door on the side of the camera and connect the small end of the USB cable to the USB connector on the camera.

Chapter 5: Unloading, Printing, and Displaying Images

77