Printing Images Using the Dock

1Confirm the following:

The dock insert that came in your camera box is attached to the top of the camera dock (see the camera dock Setup poster).

The USB cable is connected between the camera dock and your printer, and the power cable is plugged into the dock (see the camera dock Setup poster)

The printer is turned on and paper is loaded in the printer.

2Place the camera into the camera dock. The camera will turn on automatically.

3Press the Save/Print button on the dock, and the Print Setup menu displays on the camera. If you already selected images to

print using the camera Print button, the number of images selected is shown in the Print

Setup menu. Otherwise, Images: ALL is displayed. To select

or change the selections of images to print, press the Print button, scroll through the images using the buttons, then

use the buttons to adjust the number of copies for each image, and when satisfied with your selections, press the Print button again to return to the Print Setup menu.

4If all the settings in the Print Setup menu look correct, press OK on the camera to begin printing. Or, you can change settings in the Print Setup menu using the arrow keys on the camera, then follow instructions on the screen to begin printing.

NOTE There is a print preview in the lower right-hand corner of the Print Setup screen showing the page layout that will be used for printing images. This print preview updates as you change the settings for the Print Size and Paper Size.

Appendix B: Camera Dock

133