7Plug in the speaker system power.

8Turn on the speaker system.

Step 8 is optional for a two-speaker setup.

9After the speakers are connected to the PC, configure the audio software for sound output for your PC model:

•Type 3 connectors: See “Configuring Audio Output with Multi-channel Sound Manager” on page 37.

•Type 6 connectors: See “Configuring Audio Output with Sound Effect Manager” on page 38.

The following diagram shows a typical 2.1 audio installation:

OUT

Connecting 4.1 (4 speakers and a subwoofer) audio speakers

To connect two front speakers, two rear speakers, and a subwoofer for four-channel

(4.1 speaker) output:

1Turn off the PC.

.

2Connect the front speaker cable to the lime-green Audio Line Out connector that matches the back of your PC.

3

OUT

6

S

•Type 3 is three connectors

•Type 6 is six connectors

•Type S is sound card

26Getting Started Guide