E.After installing the belts and cover, run the machine and check for loose or improperly installed components.
TINE REPLACEMENTAssemble tines to rotor as shown in the following figure. Torque tines to 210
HW32020G8ZP
5/8 LOCK WASHER GRADE 8
HW20020G5ZPC
5/8 NF HEX NUT
NOTE: TORQUE TINES
TO 210
Figure 11. Tine Replacement
SEEDER MAINTENANCE(Supplied from Gandy)
•Remove bottom and rotors using snap latches, and wing nuts securing bearing re- tainers. Clean all surfaces.
•Lightly oil bearings periodically, more often if metering material with fines as pow- der may work into bearings.
•Some materials may build up on the hopper bottom, especially when atmospheric humidity is high. It may be wise to remove slide from bottom for cleaning. To re- move slide, remove the four nuts, nylon washers and slide hanger.
•
14