HP FN023UAABA, AW389USABA manual Computer Setup Menus, File menu, Security menu, Select To do this

NOTE: Your password settings and security settings are not changed when you restore the factory settings.

Computer Setup Menus

The menu tables in this section provide an overview of Computer Setup options.

NOTE: Some of the Computer Setup menu items listed in this chapter may not be supported by your computer.

File menu

Select	To do this
System Information	● View identification information for the computer and the batteries in the system.
	● View specification information for the processor, cache and memory size, system
	ROM, video revision, and keyboard controller version.
Set System Date and Time	Set or change the date and time on the computer.
Restore defaults	Replace the configuration settings in Computer Setup with the original factory settings.
	(Hard drive mode, password settings, and security settings are not changed when you
	restore the factory settings.)
Ignore changes and exit	Cancel any changes entered during the current session. Then exit and restart the computer.
Save changes and exit	Save changes and exit Save any changes entered during the current session. Then exit and
	restart the computer. Your changes go into effect when the computer restarts.

Security menu

NOTE: Some of the menu items listed in this section may not be supported by your computer.

Select	To do this
User Management (requires an	● Create a new BIOS user account.
administrator password)	● View a list of ProtectTools users.
Password Policy (requires an	Revise password policy criteria.
administrator password)
Allow HP SpareKey Enrollment	Enable/disable permission to enroll or reset HP SpareKey.
HP SpareKey	Enable/disable HP SpareKey (enabled by default).
Fingerprint Reset on Reboot (if	Enable/disable the fingerprint reader (select models only; disabled by default).
Present)
Change Password	Enter, change, or delete a BIOS administrator password.
DriveLock Passwords	● Enable/disable DriveLock on any computer hard drive (enabled by default).
	● Change a DriveLock user password or master password.
	NOTE: DriveLock settings are accessible only when you enter Computer Setup by turning
	on (not restarting) the computer.
Automatic DriveLock	Enable/disable Automatic DriveLock support.

Computer Setup Menus 105